Cisco WIC-1ADSL config for 1800 series router and ios 12.4

This config is for the Cisco 1800 series router running IOS 12.4. IOS 12.4 has some command and syntax changes in reguards to interfaces and configuration commands for PPPOE. This config was submitted by my good friend Pedro Rivera.

version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
ip cef
!
!
!
!
ip name-server 205.152.144.23
!
!
interface FastEthernet0/0
 description Internal Lan
 ip address 10.10.10.254 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 ip tcp adjust-mss 1452
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface ATM0/0/0
 no ip address
 no atm ilmi-keepalive
 dsl operating-mode auto
!
interface ATM0/0/0.1 point-to-point
 pvc 8/35
  pppoe-client dial-pool-number 1
 !
!
interface Dialer0
 ip address negotiated
 ip mtu 1452
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 dialer pool 1
 dialer-group 1
 ppp authentication chap callin
 ppp chap hostname xxxxxxxxxxxxx@xxxxxxxxxxxxxx.net
 ppp chap password 0 xxxxxxxxxxxxxxx
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
!
ip http server
no ip http secure-server
ip nat inside source list 1 interface Dialer0 overload
!
access-list 1 remark INSIDE_IF=FastEthernet0/0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.10.10.0 0.0.0.255
dialer-list 1 protocol ip permit
!
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
 login
!

Tags: , ,

Leave a Reply

You must be logged in to post a comment.

Categories
Support Our site